FP-1A Fin Press

The FP-1A fin production line incorporates the use of a 30 ton “C” frame style Oak Fin Press along with an uncoiler, lubricator, fin stamping die and stacker/suction unit combination. This production line allows for the production of quality fins ranging from 1 to 108 inches long when using fin stock with a maximum width of 18 inches. The press has a bed opening of 30 inch x 20 inch and can accommodate fin dies with a shut-height range of 8 1/2 inch to 10 1/2 inch. The standard stroke length offered on the FP-1A Fin Press is 1 1/2 inch. It can be changed to 2 inch if taller collar heights are required. A hydraulic withdrawal feature incorporated into the press slide allows access to the inner tooling of the fin stamping die without removing the die from the press.

Burr Oak Tool manufactures three sizes of fin lines for your production needs. Our product range allows us to provide the perfect fin making system for the largest mass production coil manufacturers or the smallest specialty coil shops. In addition to these presses, Burr Oak Tool can also provide larger tonnage systems for producing steel fins or other industrial heat transfer applications; however, for special projects such as these, you will need to contact a sales representative for product specifications. For specific machine options please use the ‘view pdf’ button below.

Complete FP-1A with Shuttle Type Stacker

Rear View of FP-1A with Standard Single Spindle Uncoiler

Complete FP-1A with Rotary Type Stacker

FP-1A Suction Unit

FP-1A Standard Single Spindle Uncoiler

FP-1A Stock Lubricator