Oak Machines in Stock

7mm O.D. x 19mm x 11mm Staggered Pattern, 60 Rows x 2 Progression, 4 Draws, Special Tool Steels, Collar Height Range: 1.2mm to 2mm, Raised Collar Base, Surface Enhancement:  Opposed Louvers on Flat Surface, End Notch Station (Gaggable), Middle Notch Station (Gaggable), Plain Slit and Edge Trim Blades

7mm O.D. x 19mm x 11mm Staggered Pattern, 72 Rows x 2 Progression, 4 Draws, Special Tool Steels, Collar Height Range:  1.2mm to 2mm, Raised Collar Base, Surface Enhancement:  Opposed Louvers on Flat Surface, Special Tool Steels, Collar Height Range:  1.2mm to 2mm, Raised Collar Base, Surface Enhancement:  Opposed Louvers on Flat Surface

Options: Compact Single, Standard Duty Lift W/ Adjustable Enclosures, Front Plate Shrink (Cylinder Actuated), Self-Storing Back Plate W/ Powered Height Adjustment, Cylinder Actuated Height Adjustment, Automatic Coil Height Control, Dual Presize Valve & Transducer, Rod Short-Out System, Final Expander Support Mechanism, Hydraulic System Cooling (Oil To Air), Tube Entry Device W/ Coil Collapse Detector, Extra Guide Plates, 1+1 Coil Expansion (5” Diff. Max)

Pattern #1: 5mm - 16mm (.630”) X 13.86mm (.546”) Staggered,
2 Rows, 79/78 Holes Per Row, (157) Total

Pattern #2: 5mm - 19.05mm (.750”) X 11.40mm (.449”) Staggered,
2 Rows, 67/66 Holes Per Row, (133) Total

Maximum No. Of Tubes: 145       Tubing Specifications: 5mm O.D. X .013” Rifled Wall Minimum Coil Height: 50”     Maximum Coil Height: 84”     Maximum Fin Length: 50”

Compact Single Expander
Minimum Coil Height: 12", Maximum Coil Height: 120"
Maximum Fin Length: 50"
Pattern #1: 3/8 - 1.000 x .866 Staggered, 6 Rows, 51/50 Holes per Row

Heavy Duty Lift Assembly W/ Fixed Enclosures, Self-Storing Back Plate W/ Powered Height Adjustment (Cylinder Drive), Automatic Coil Height Control, Rod Short-Out System (3 Plates), Final Expander Support Mechanism, Hydraulic System Cooling (Oil To Air), Quick-Change Receiver, Coil Ejector (2), End Sheet Detector (2), Air Conditioner For Electrical Enclosure

Currently at Oak Eurasia. Will ship from Czech Republic.

Standard Right Hand Cutoff with Pull-Apart
Tooling: 8 mm & 12 mm 
Straightener with Sizing and Indicator Dials
8' Runout Table, Powered Coil Stand with Aluminum Reel.

Currently at Oak Eurasia. Will ship from Czech Republic.

Right Hand, 6 Tube, Max bend length: 86.5"

Tube collectors, Mandrel Rod Micro Adjust, Tube Pickoff, Tube End Sizer, Tank Heater, Short Bend Head, Mandrel Injector, Strip Assist, CFCL Lateral Adjust w/Limits, 
Out of Tube Sensor, CE Certification, Individual Upper Feed Belts

Hairpin Trimmer

Max 12' hairpins

Tooling: 3/8" OD x 1.000 BC

Single Tube Universal Hand Bender

Tooling:
5/8 dia x 1-1/2 CL
5 mm dia x 16 mm CL